Harbor Freight Tools 67139 Record Setup Record Frame Rate, Record setup Record Framerate

	RECORD SETUP	RECORD FRAME RATE
1 O N	2 NO	1 3 FPS		2	5 FPS
	record setup			record Framerate
				TOTAL 36 FPS

3O N

4 O N 3 2 5FPS 4

3FPS

()MOVE ( SEL)

SELECT (MENU) ESC ( )MOVE (SEL)+ ( )- (MENU) EXIT

The Record Setup sub-menu allows you to choose which channels (cam- eras) will record.

1.In the Record Setup sub-menu, press the arrow keys [, , and ] to select a channel (camera).

2.Press [SEL] to change the setting between “on” or “off”.

3.Press [MENU] to exit the Record Setup sub-menu once all the camera channels have been set.

Note: If a channel has been disabled (set to “off”) in the Channel Setup, it will not be able to record, and “NOCAM” will display for that channel on the screen in the Record Setup sub- menu.

The total number of photos taken per second is divided among the cameras. The total frame rate of all the cameras in use is set to 60fps (frames per second). The higher set- tings produce better images, but use up more hard drive space.

1.In the Record Frame Rate sub-menu, press the arrow keys [, , and

] to select a channel (camera).

2.Press [SEL] to increase, or STOP to decrease, the number of frames per second for that camera.

3.Repeat step 1 and 2 for each cam- era, keeping the total number of frames per second (displayed in the center of the screen) at or below 60.

4.Press [MENU] to exit the Record Frame Rate sub-menu once all the camera frame rates have been set.

Note: The DVR will automatically adjust the largest frame rate to a smaller value if you enter more than a total of 60fps for all the cameras.

Note: If you have your DVR set to PAL, your maximum framerate is 50fps.

SKU 67139 For technical questions, please call 1-800-444-3353. Page 19