Maintenance/Servicing | NTSC/PAL Output Select |
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation:
Unplug the unit from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from unit failure: Do not use damaged equipment. If abnormal noise occurs, have the problem corrected before further use.
Cleaning and Maintenance
BEFORE EACH USE, inspect the general condition of the unit, includ- ing connections, wiring and cameras. Check for loose or damaged hard- ware, damaged electrical wiring, and any other condition that may affect its safe operation.
WARNING! If the supply cord of this DVR is damaged, it must be replaced only by a qualified ser- vice technician.
This unit is set to NTSC video format. It can be changed to PAL by changing the jumper JS1 setting. This change must be made by a qualified technician. To make this adjustment:
1.Open the cover.
2.Slide the switch to NTSC or PAL as needed for your system.
3.Replace and secure the cover.
SKU 67139 | For technical questions, please call | Page 35 |
