AREA SELECTION | It also shows hard drive size and how | ||
|
|
| much memory is used. |
|
| 1. | In the Main Menu, press the up or |
|
| ||
| |||
|
|
| down arrow keys [ , ] to select |
|
|
| |
|
|
| “Hard Drive Setup”. |
|
|
| |
| Press [SEL] to enter the Hard Drive | ||
|
| 2. | |
| |||
|
|
| Setup |
|
|
| |
OVERWRITE ENABLE/DISABLE
This
1.To set individual blocks of the screen:
a.Press the arrow keys [
, 
, 
and 
] to select a block in the grid
b.Press the [SEL] button to toggle be- tween showing the image in the block (motion is detected where the image can be seen), or shading the image in the block (motion will not be detected in theses areas).
2.To disable all areas of the screen from detection, press STOP 
. The screen will be completely shaded.
3.To have all of the camera’s viewing area detect motion, select QUAD. All of the screen will be in view.
4.Press [MENU] to exit
5.Press [MENU] twice more to go back to the Main Menu.
HARD DRIVE SETUP
The Hard Drive Setup
hard drive setup
| OVERWRITE ENABLED | [ ON] |
| MAXTOR STM250310AS |
|
| MASTER HDD SIZE | 250203MB |
| MASTER HDD USED | 124931MB 50% |
| MASTER HDD FORMAT |
|
| SLAVE HDD SIZE | N/A |
| SLAVE HDD USED | N /A |
| SLAVE HDD FORMAT |
|
( | )MOVE ( SEL)SELECT (MENU)EXIT | |
1.In the Hard Drive Setup 
, 
] to select
“Overwrite Enabled”.
2.Press [SEL] to switch between the
“ON” which will overwrite the oldest video when the hard drive is full, and
“OFF” which will stop recording when the hard drive is full.
MASTER HDD FORMAT
1.In the Hard Drive Setup 
, 
] to select “Master HDD Format”.
2.Press [SEL] to Format the hard drive. This will erase all recorded video from the hard drive and will make the hard drive readable by the DVR.
3.You will be prompted for a password before formatting. The default pass- word is “111111”.
SKU 67139 | For technical questions, please call | Page 22 |
