PRODUCT SPECIFICATIONS
Item |
| Description |
Media Tank Capacity | 90 Pounds |
|
Maximum Tank Pressure | 125 PSI |
|
Pressure Gauge Indicator | 0 ~ 150 PSI |
|
Required Compressed Air | 2 HP Compressor With 3/8” Diameter Air Hose | |
System (Not Included) |
|
|
Recommended Media Type | Glass Bead / Silicon Carbide | |
| Alumina / Walnut Shell / Brass Bead | |
Recommended Use | Use with 80, 100, or 120 Grit Media, at 60 PSI, with 3/32” | |
| Nozzle for best results (Run Time: 45 minutes with 90 Lbs. Media) | |
Water Trap Type | Push Button to Drain |
|
Accessories | 3/32” Nozzle (Qty. 1) / 1/8” Nozzle (Qty. 1) | |
| 8 Ft. x 1/2” I.D. Hose (Qty. 1) / Blast Hood (Qty. 1) | |
| Sandblaster Gun (Qty. 1) / Pipe Thread Seal Tape (Qty. 1) | |
Net Weight | 29.70 Pounds |
|
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
UNPACKING
When unpacking, check to make sure that all the parts and accessories listed on page 15 are included, and the product is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SAFETY WARNINGS AND PRECAUTIONS
1.Do not operate the Pressure Blasting System if the Control Lever does not turn the tool on or off. Any tool that cannot be controlled with its Control Lever is dangerous and must be replaced.
2.Keep work area clean. Cluttered areas invite accidents.
3.WARNING! Do not operate pneumatic equipment in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Pneumatic equipment can create sparks which may ignite flammables.
SKU 93889 For technical questions, please call | PAGE 2 |
