Harbor Freight Tools 93889 manual To Attach The Wheels, To Attach The Material Hose, See Figure E

To Attach The Wheels:

1.Align the two mounting holes in each of the two Wheel Brackets (20) with the two threaded mounting holes in each of the two Shaft Supporting Bars at the bottom of the Tank Assembly (3). Then, use four Screws (16) to secure the Wheel Brackets to the Shaft Supporting Bars. (See Figure D.)

2.Insert the Steel Axle (23) through the bottom hole of each of the two Wheel Brackets (20). Place a Flat Washer (21) onto each end of the Steel Axle. Insert a Wheel (22) onto each end of the Steel Axle. Place another Flat Washer (21) onto each end of the Steel Axle. Then secure the Wheels to the Steel Axle, using one Cotter Pin (24) for each Wheel. (See Figure D.)

SCREW			TANK ASSEMBLY
	(3)
(16)
		SHAFT SUPPORTING BAR

WHEEL BRACKET

WHEEL(20) (22)

FLAT WASHER

(21)

STEEL AXLE

(23)

FIGURE D

To Attach The Material Hose:

COTTER PIN

(24)

1.Insert two Hose Clamps (26) onto the Material Hose (25). Insert one end of the Material Hose onto the Media Manifold (19). Insert the other end of the Hose onto the Barb Fitting (44) of the Sandblasting Gun. Then secure the Hose to the Media Manifold and Sandblasting Gun, using the two Hose Clamps.

(See Figure E.)

FIGURE E

MEDIA MANIFOLD	HOSE CLAMP
(19)	(26)

SANDBLASTING GUN

HOSE CLAMP

(26)

MATERIAL HOSE

(25)

SKU 93889 For technical questions, please call 1-800-444-3353 PAGE 8