Harman-Kardon 950-0321-001 Setting Up the Receiver, Using the Remote After it is Programmed

BDS

Preparing the Remote Control and Setting Up the Receiver

remote is programmed to operate your TV in the Aux control mode, you can also have the TV’s channel +/– functions “punch through” and operate even when the remote is in the Disc, Radio or iPod control modes.

1.Press and hold the button for the main device the remote will be operating. The button will light up, go dark and then light up again. Release the button.

2.Select the type of punch-through programming.

a)For “punch-through” channel control, press the Channel Up button.

b)For “punch-through” transport control, press the Play button.

3.Press the Aux button. The original source button will flash to confirm.

You can repeat Step 1 – Step 3 for any of the remote’s source-selector buttons (Aux, Radio etc.). NOTE: “Punch-through” channel and transport commands will override the existing commands for those buttons in the source modes you program.

To undo “punch-through” programming, follow the same steps as above, but press the same source selector button in Step 1 and Step 3.

Using the Remote After it is Programmed

Pressing the remote’s Aux source-selector button will put the remote into the auxiliary- control mode, and it will control the auxiliary component(s) via the codes you have programmed into it.

To switch the remote back to the BDS receiver-control mode from the auxiliary-control mode, press any one of these buttons: Disc, Radio, iPod or Home.

Setting Up the Receiver

NOTE: The menu screens shown in this manual are for illustrative purposes and may differ somewhat from the actual displays.

To set up your BDS system, you will use the remote to navigate through all of the on-screen menus and make selections from them.

tUse the Cursor Up/Down buttons to navigate through the menu list. When an item is highlighted, a border will appear around it.

tTo select a highlighted item, press the OK button. The screen will change depending on your selection.

tTo return to the previous screen, press the Exit button.

Setup Wizard

When you turn your BDS receiver on for the first time, the on-screen menu will display the Setup Wizard.

Setup Wizard Page: 1/5

Welcome to the Harman Kardon BDS Setup

Wizard.

Some simple information is needed to ensure you get the best experience from your product.

You can adjust these settings later in addition top making changes to more advanced settings by pressing the ‘Settings’ button on the remote.

OK Next

Before you can use your BDS system, you need to set the language and make a few basic settings so that the BDS receiver’s video output will work properly with your TV. Press the OK button and the Wizard’s language screen will appear.

Setup Wizard	Page: 2/5
Please select which language you	English
would like the BDS menus to appear.

Español

Français

Deutsch

Italiano

Previous OK Next

After setting the language you want the on-screen menus to use, press the OK button, and the Wizard’s TV-resolution screen will appear.

	Setup Wizard		Page: 3/5
Please select the highest resolution that your			Auto
TV supports. If you are unsure, select ‘Auto’.		480p/576p
Upon making a selection the screen will be
changed to the chosen resolution. You will be			720p
presented with the option to continue with the			1080i
new resolution or ‘Cancel’ to return to the
previous resolution. If the screen remains			1080p
blank, please wait 15 seconds without
pressing anything and the system will
automatically return to the previous resolution.
	Previous	OK	Next

After selecting your TV’s highest resolution, press the OK button and the Wizard’s aspect-ratio screen will appear. NOTE: If you’re unsure of your TV’s highest resolution, select “Auto,” and BDS will automatically select the optimal resolution for you.

Setup Wizard	Page: 4/5
Please select the best aspect ratio	16:9 Full
that fits your TV.	16:9 Normal
	4:3 Pan & Scan
	4:3 Letterbox

Previous OK Next

After selecting the aspect ratio that best fits your TV, press the OK button to save your setting, and then press it again to exit the Setup Wizard.

ENGLISH

19