Harman-Kardon AVR360 owner manual REAR-PANEL Connections, Use an HDMI-to-DVI adapter

REAR-PANEL CONNECTIONS

A-BUS IR

Remote IR Input

Carrier IR Output

HDMI 1-4

HDMI Monitor

Output

Video

Remote IR

Video Monitor

(AVR 460 only)

(AVR 460 only)

1-3 Inputs

Output

Inputs

Output

Output

6-/8-Channel Inputs

Component

Zone 2

Video 2

Component Video

AC Power

The Bridge III

Analog 2 & 4 Outputs

1-2 Inputs

Output

IR Input

Monitor Output

Input

FM Antenna

AM Antenna

A-BUS Power Input

A-BUS Port

A-BUS on

AVR 460 only

Zone 2 Audio Outputs	Preamp	Front Speaker	Surround	Surround	Center	Switched AC	Main	Coaxial 1-2 Digital Audio Inputs
	Outputs	Outputs	Back/Zone 2	Speaker	Speaker	Accessory	Power
	(AVR 460 only)		Speaker	Outputs	Outputs	Outlet	Switch

Analog 1-5	Subwoofer	Outputs	Coaxial Digital	Optical 1-3	Fan Vents
			Audio Output	Digital Audio
Inputs	Output
				Inputs
				(AVR 360: Optical
				1-2)

ENGLISH

Main Power Switch: This mechanical switch turns the power supply on or off. It is usually left on, and cannot be turned on or off using the remote control.

6-/8-Channel Inputs: Connect the multichannel analog audio outputs of a non-HDMI player (DVD-Audio, SACD™, Blu-ray Disc™ or HD-DVD, or any other external decoder) to these jacks.

Coaxial 1/2 and Optical 1/2/3 Digital Audio Inputs: If a source has a compatible digital audio output, and if you are not using an HDMI connection for audio for the device, connect it to one of these jacks to hear digital audio formats, such as Dolby Digital, DTS and linear PCM. Use only one type of digital audio connection for each source.

Coaxial Digital Audio Output: If a source is also an audio recorder, connect the Coaxial Digital Audio Output to the recorder’s matching input for improved recording quality. Only PCM digital audio signals are available for recording. Both coaxial and optical digital audio signals are available at this Digital Audio Output.

Zone 2 Infrared (IR) Input: Connect a remote IR receiver located in the remote zone of a multizone system to this jack to control the AVR (and any source devices connected to the Remote IR Output) from the remote zone.

Remote Infrared (IR) Input and Output: When the remote IR receiver on the front panel is blocked, connect an optional IR receiver to the Remote IR Input jack. The Remote IR Output may be connected to the Remote IR Input of a compatible product to enable remote control through the AVR.

Remote IR Carrier Output(AVR 460 only): This output is similar in function to the Remote IR Output, with the difference that this jack outputs the full infrared signal as received by the AVR’s IR sensor or the Remote IR Input, while the Remote IR Output jack outputs a “stripped” signal that has no carrier frequency.

HDMI Inputs and Output: HDMI (High-Definition Multimedia Interface) is a connection for transmitting digital audio and video signals between devices. Connect up to four HDMI-equipped source devices to the HDMI inputs using a single-cable connection.

When you connect the HDMI Output to your video display, the

AVR 460/AVR 360 will automatically transcode analog video signals to the HDMI format, upscaling to as high as 1080p.

NOTES: When connecting a DVI-equipped display to one of the HDMI Outputs:

•• Use an HDMI-to-DVI adapter.

•• Make sure the display is HDCP-compliant. If it isn’t, do not connect it to an HDMI Output; use an analog video connection instead.

•• Always make a separate audio connection.

Analog 1 – 5 Inputs: Connect the left and right analog audio outputs of a source device to any of these inputs. These inputs may be paired with any video inputs.

NOTES:

The Analog 2 and 4 inputs are each associated with a set of outputs. Consider using these connectors for an audio or video recorder.

You may optionally connect a source to both an analog and digital audio input. This is useful for making recordings, for multizone applications or simply as a backup.

9