Operation

playing, the AVR 110 will automatically detect whether it is a multichannel Dolby Digital, DTS source, MP3 or a conventional PCM signal, which is the standard output from CD players. A Bitstream Indicator A will light in the Main Information Display ó to confirm that the digital signal is Dolby Digital, DTS

or PCM.

Digital Status Indicators

When a digital source is playing, the AVR 110 senses the type of bitstream data that is pres- ent. Using this information, the correct sur- round mode will automatically be selected. For example, DTS bitstreams will cause the unit to switch to DTS decoding, and Dolby Digital bit- streams will enable Dolby Digital decoding. When the unit senses PCM data from CDs and LDs, it will allow the appropriate surround sources to be selected manually. Since the range of available surround modes is depend- ent on the type of digital data that is present, the AVR 110 uses a variety of indicators to let you know what type of signal is present. This will help you to understand the choice of modes.

When a digital source is playing, a Bitstream Indicator A will light to show which type of signal is playing:

DOLBY D: When the DOLBY D indicator lights, a Dolby Digital bitstream is being received. Depending on the settings on the source player and specific surround information and number of channels on the disc, a number of surround modes are possible. For discs with full 5.1 audio, only the Dolby Digital and VMAx modes are available. When the Dolby Digital signal is only two-channel, you may also select from the Logic 7 Cinema/Music, Hall, Theater, Dolby Pro Logic or Dolby 3 Stereo modes.

DTS: When the DTS indicator lights, a DTS bitstream is being received. When the unit senses this type of data, only the DTS mode may be used.

PCM: When the PCM indicator lights, a stan- dard Pulse Code Modulation, or PCM, signal is being received. This is the type of digital audio used by conventional compact disc and laser disc recordings. When a PCM bitstream is pres- ent, all modes except Dolby Digital and DTS are available.

MP3: When the MP3 indicator lights, a com- patible MPEG 1/Layer 3 digital signal is being received. This is the popular audio format used by many computer programs for recording com- pressed audio files. When an MP3 bitstream is present, the sound will automatically be played in the stereo (surround off) mode. The surround modes are not available during MP3 playback.

In addition to the bitstream indicators, the

AVR 110 features a set of unique channel-input indicators that tell you how many channels of digital information are being received and/or whether the digital signal is interrupted.

These indicators are the L/C/R/LS/RS/LFE letters that are inside the center boxes of the Speaker/Channel Input Indicators O in the front panel Main Information Display ó. When a standard analog signal is in use, only the “L” and “R” indicators will light, as analog signals have only left and right chan- nels, respectively.

Digital signals, however, may have two, five or six separate channels, depending on the pro- gram material, the method of transmission and the way in which it was encoded. When a digi- tal signal is playing, the letters in these indica- tors will light in response to the specific signal being received. It is important to note that although Dolby Digital, for example, is referred to as a “5.1” system, not all Dolby Digital DVDs or programs are encoded for 5.1. Thus, it is sometimes normal for a DVD with a Dolby Digital soundtrack to trigger only the “L” and “R” indicators.

NOTE: Many DVD discs are recorded with both “5.1” and “2.0” versions of the same sound- track. When playing a DVD, always be certain to check the type of material on the disc. Most discs show this information in the form of a listing or icon on the back of the disc jacket. When a disc does offer multiple soundtrack choices you may have to make some adjust- ments to your DVD player (usually with the “Audio Select” button or in a menu screen

on the disc) to send a full 5.1 feed to the AVR 110. It is also possible for the type of sig- nal feed to change during the course of a DVD playback. In some cases the previews of special material will only be recorded in 2.0 audio, while the main feature is available in 5.1 audio. As long as your DVD player is set for 6-channel output, the AVR 110 will automatically sense changes to the bitstream and channel count and reflect them in these indicators.

The letters used by the Speaker/Channel Input Indicators O also flash to indicate when a bitstream has been interrupted. This will happen when a digital input source is selected before the playback starts, or when a digital source such as a DVD is paused. The flashing indicators remind you that the play- back has stopped due to the absence of a digital signal and not through any fault of the AVR 110. This is normal, and the digital play- back will resume once the playback is started again.

Night Mode

A special feature of Dolby Digital is the Night mode, which enables AC-3 input sources to be played back with full digital intelligibilty while reducing the minimum peak level by 1/4 to 1/3. This prevents abruptly loud transitions from dis- turbing others, without reducing the impact of the digital source. The Night mode is available only when Dolby Digital signals with special data are being played.

The Night mode may be engaged when a Dolby Digital DVD is playing by pressing the Night Mode button k on the remote. Next, press the Ú/Û buttons mq to select either the middle range or full compression versions of the Night mode. To turn the Night mode off, press the Ú/Û buttons mq until the message in the lower third of the video display and the Main Information Display W reads D-Range Off. When the Night mode is active, the Night Mode Indicator N will also light.

IMPORTANT NOTES ON

DIGITAL PLAYBACK:

1.When the digital playback source is stopped, or in a Pause, Fast Forward or Chapter Search mode, the digital audio data will momentarily stop, and the channel position letters inside the Speaker/Channel Input Indicators O will flash. This is normal and does not indicate a problem with either the AVR 110 or the source machine. The AVR 110 will return to digital playback as soon as the data is available and when the machine is in a standard play mode.

2.Although the AVR 110 will decode virtually all DVD movies, CDs and HDTV sources, it is possible that some future digital sources may not be com- patible with the AVR 110.

24OPERATION

Page 24
Image 24
Harman-Kardon AVR 110 owner manual Or PCM, Digital Status Indicators, Addition to the bitstream indicators, Night Mode

AVR 110 specifications

The Harman-Kardon AVR 110 is a versatile audio/video receiver designed for those seeking to enhance their home entertainment experience. Renowned for its sleek design and impressive sound quality, the AVR 110 is a reliable choice for anyone looking to create a home theater system.

At the core of the AVR 110 is its ability to deliver a rich, immersive audio experience. With a power output of 100 watts per channel, this receiver can fill a room with high-fidelity sound that caters to both music enthusiasts and movie lovers alike. The AVR 110 features a high-current, low-impedance design, which ensures that it can drive a wide range of speaker types and configurations without sacrificing performance.

One of the standout features of the AVR 110 is its advanced processing capabilities. It supports Dolby Digital and DTS formats, providing an authentic surround sound experience that brings films and music to life. The Dolby Pro Logic II technology also allows for expanded sound fields, making it possible to enjoy stereo recordings in a simulated surround sound format.

The AVR 110 is equipped with multiple audio and video inputs, making it easy to connect a variety of devices, including DVD players, gaming consoles, and streaming devices. This level of connectivity is complemented by a built-in AM/FM tuner, allowing users to explore radio programming as well. Additionally, the receiver features composite and component video switching, ensuring high-quality video signals for optimal viewing experiences.

Another notable characteristic of the AVR 110 is its user-friendly interface. The GUI (Graphical User Interface) simplifies navigation through various settings, allowing users to customize their audio and video configurations easily. This is particularly beneficial for those who may not be well-versed in home theater technology.

In terms of design, the AVR 110 boasts a modern and minimalist aesthetic, with a classic black finish that seamlessly integrates into any home décor. The front panel features a clear display, which provides important information about the current audio and video settings, enhancing usability.

Overall, the Harman-Kardon AVR 110 delivers a well-rounded, high-quality audio and video experience that is ideal for both casual viewers and serious audiophiles. Its combination of powerful performance, advanced technology, and ease of use makes it a competitive option in the world of home theater receivers. Whether watching movies or enjoying music, the AVR 110 is designed to provide an engaging experience that satisfies even the most discerning listeners.