Harman-Kardon AVR 254 owner manual Memory

ADVANCED FUNCTIONS

•The RS-232 Reset Button on the rear panel of the AVR 254 does not perform a system reset. DO NOT press the RS-232 Reset Button.

To reset the AVR 254, place the receiver in Standby mode (press the front-panel Standby/On Switch so that the Power Indicator turns amber). Then press and hold the front-panel OK Button for at least five seconds until the RESET message appears in the display.

Follow the directions in the note on page 32 to restore the picture if necessary.

If the receiver still does not function correctly after a processor reset, contact an authorized Harman Kardon service center for assistance. Authorized service centers may be located by visiting our Web site at www.harmankardon.com.

Memory

If the AVR 254 is unplugged or experiences a power outage, it will retain user settings for up to four weeks.

54 54