Harman-Kardon BDS770 owner manual Connecting Your Coaxial Digital Audio Source Device

BDS 270/BDS 570

Connections

Connecting Your Coaxial Digital Audio Source Device

If one of your non-HDMI source devices has a coaxial digital output, connect it to the receiver’s Coaxial Digital Input connector. NOTE: Make only one type of digital connection (HDMI, optical or coaxial) from each device.

Coaxial-Equipped

Source Device

To Coaxial Digital

Audio Output

Coaxial Digital Audio

Cable (not supplied)

Connecting Your Analog Recorder

Connect an analog audio recorder’s inputs to the receiver’s Analog Audio Output connectors. You can record any analog audio input signal.

Analog

Recorder

To Record

Inputs

Stereo Audio Cable (not supplied)

Connecting Your Analog Audio Source Devices

Use the receiver’s Aux In connectors for up to two source devices that don’t have HDMI or digital audio connectors.

Analog

Source Device

To Stereo Analog

Audio Output

Stereo Audio Cable (not supplied)

Connect an Optional The Bridge IIIP

Connect an optional The Bridge IIIP to the receiver’s The Bridge IIIP connector. Insert the plug until it snaps into place in the connector. IMPORTANT: Connect The Bridge IIIP

only with the receiver’s power turned OFF.

The Bridge IIIP

12