Harman Stove Company PC 45 Assembly and Installation, Unpacking, Installing rear cover panels

Assembly and Installation

	Rear		Shipping Bolts: These holes are
			also used for Mobile Home
Cover Panels			Installation
		Fig. 1

Unpacking

The PC 45 is bolted to the skid to prevent move- ment during shipping.

To free the stove from the skid you must re- move the hold-down bolts in the rear of the pedestal base.

Installing rear cover panels

The rear cover panels are removed from the stove to make it easier to get at the hold-down bolts.

The rear cover panels are packed inside the hopper and should be installed on the stove as shown. It is recommended that the rear covers are installed after the unit is in place and the vent pipe is installed.

Firebrick

Install the firebrick vertically on the angle above the burnpot.

Fig. 2

4 PC 45 Corn/Pellet Stove