Room Sensor Installation
Room sensor Installation
Fig. 31
The room sensor is a small temperature sensor on the end of a 60" wire. This sensor is installed much like a standard wall thermostat. Because it is so small, it can be hidden along the trim of a doorway or even up the leg of a coffee table. There is a remote room sensor port on the rear of the unit for easy external connection. Use standard
to control the temperature.
In most installations locating the room sensor behind the stove near the distribution fan works well because the sensor monitors the room air being drawn into the distribution fan.
NOTE: Distances of more than 25 feet from the unit or in another room are not recommended. The room sensor is essential for the XXV's excellent efficiency.
NOTE: It is recommended that the room sensor be installed, even if only installed on the rear of the unit as a return air sensor.
XXV Pellet Stove 23