Options
XXV Top Flue Option
The Top Flue option attaches to the exhaust on the rear of the stove, and extends it to the top with a six inch stub.
This gives the appearance of a wood stove and also allows venting with existing single wall, connector. A 12 inch piece of 4" pellet vent is included to act as an insulator only. Note: The top flue adaptor is not approved for use with pellet vent pipe. It is only tested for use with chimney connector (6- inch pipe) into an existing "class A" chimney.
Harman Part
Side View
Direct Vent Wall Passthrough
The Harman Direct Vent Wall Passthrough makes installing your Harman Pellet Stove with outside air a lot easier. It is made to fit walls from 4 1/2" up to 10 1/8" thick with a square opening of 6" to 6 1/2".
Harman Part
Outdoor Half
Indoor Half
Adjustable from 4 1/2" to 10 5/8" wall thickness
Passthrough hole for 3" PL vent pipe
28XXV Pellet Stove