8
Installing the Ramp
Step 1
Install the ramp roller guide on the side of the lift tower using the screws already installed in the panels.
Step 2
Attach the two ramp pivot tabs to the lower landing sides of the platform. Reinsert the hex bolts, one of which will go through the guard panel post, and tighten.
Step 3
Attach the ramp to the pivot tabs using shoulder bolts and locking nuts. Tighten the nuts until they seat against the bolt shoulder.
Step 4
Attach the ramp roller arm by bolting it to the underside of the ramp.
The ramp roller should align and make contact with the ramp roller guide.
