Hasselblad H4D200MS user manual Example

–continued

7)In turn the Rearscroll wheel to choose the amount of EV variation required:  3, 2, 1, 1/2, 1/3 EV.

8)Press SAVE.

9)Press ENTER again from the Bracketing screen to activate the function. Press On. Note that this now reads Off and the line of text at the bottom of the screen reads ‘Bracket- ing on’.

Half-press the shutter release button to standby mode for this function (press the shutter release button again (full press) for activation) or full-press the shutter release for im- mediate activation.

To escape from this mode press MENU, then Enter on the Bracketing screen, then Off (AF button).

Sequence highlighted. ‘Standard, over, under’ chosen as option.

EXAMPLE

Screen after Bracket- ing setting activated indicating 3 frames re- maining in a Standard, Over, Under, sequence with no adjustment to the next frame.

Step highlighted.

1/3 EV variation chosen as option­.

EXAMPLE

Viewfinder display indicating no adjustment to next frame and three frames left in the sequence.

T i p

Abracketing sequence can be stopped mid-se- quence by pressing the ESC (ON.OFF) button.

N o t e

As an example, a 5 frame sequence with an EV 1 variation ­setting at ‘Standard, Over, Under’ would produce: Standard (O EV ­variation), +1EV, -1EV, +2EV, -2EV.

T i p

Check the lower text-row on the screen for ON or OFF status.

N o t e

See note at the beginning of this section regarding the difference between­ Single and Continuous drive settings. In both cases, the bracketing function is automatically reset for a new sequence.

N o t e

The default setting is a shutter speed change in a bracketing ­sequence. However, if the camera is set in Manual mode, you can choose an aperture change instead (Custom Options > Bracket param. in Manu- al #25 on grip).

70