PID (1): Parallel, PID (2): USB 1, PID (3): USB 2
By default, the computer will first search for the Print Server(s)
on the network by using the IPX/SPX protocol.
If the IPX/SPX protocol is installed, the Print Server will be
displayed along with its Node ID, as shown in Node column.
(The last 6 digits of the Node ID, located on the back of the Print
Server unit). Select one of the Print Server’s ports from the list.
If the IPX/SPX protocol is not installed, no Print Server will be
shown in the display box. Then please select TCP/IP or NetBEUI
alternatively.
It starts again to search for the Print Server on the network by
using the protocol you specify in the step above. When finished,
the Print Server will be displayed along with its Node ID, as