DIVA T/A PC Card Reference Guide 40
Call Control Commands—Continued
Command Description
AT&Zn=v Store Telephone Number: Specify stored tel e phone
number(s). The telephone number can be a string with
up to 20 characters (0-9, *, #, space, hyphen,
parenthesis, and period are accepted). You can store
up to ten telephone numbers where n identifies the
memory location number (0-9) and v is the telephone
number.
ATA Answer Calls: Instructs the DIVA T/A to accept an
incoming call.
ATDnDial a Number: Directs the DIVA T/A to go onli ne ,
dial the specified number, and attempt to establish a
connection.
Punctuation characters may be used for clarity, with
parentheses, hyphens, spaces, and periods being
ignored. Also, the “P”, “T”, “W”, “@”, “, and “R”
dial modifiers used by modems are ignored since they
are not relevant to ISDN.
The “~” and “&” characters are used to dial two
numbers within the same dialing string.
The following modifiers can be used:
L
Re-dial last number
S=n
Dial the number stored in the directory n (n=0-9)
N
Establish a data connection
I
Establish a 56K ISDN data connection
V
Establish an ISDN DATA over VOICE conn e c t ion
;
Any character following this parameter is treated as an
AT command (entered in the command mode)