DIVA T/A PC Card Reference Guide 37
COM Port Configuration Commands—Continued
Command Description
ATS5=n Back Space Character: Sets the backspace
character used for command line editing.
n can be a value between 0-32 (default is
ASCII 008 backspace).
ATSn=v S-Register n to Value v: Use this command to
set S-Register n to the value v.
ATVn Result Code Format: You can set your DIVA
T/A to display messages as digits or words.
Word responses are preferable since they are
more meaningful.
n=0
Result codes are sent to the DIVA T/A as
numbers (short form).
n=1
Result codes are sent to the DIVA T/A as full
words (long form/verbose) (default).
ATWn Connect Message Control: This command
controls the format of connection messages.
n=0
Upon connection, the DIVA T/A reports the
DTE speed only; for example , CONNECT
19200 (default).
n=1
Upon connection, the DIVA T/A reports the
DCE speed, the protocol, and the DTE speed.
n=2
Upon connection, the DIVA T/A reports the
DCE speed; for example, CONNECT 64000.