![](/images/new-backgrounds/1254324/25432413x1.webp)
2.With the help of a second person, carefully tip the Uprights (97) down as shown. (Note: It may be helpful to place one foot against one of the Extension Legs [115] as you tip the Uprights.) Make sure that the Extension
Legs remain in the Uprights.
Attach each Extension Leg (115) with two Extension Leg Bolts (80) and two 1/4” Washers (39) as shown.
3.Attach the four Base Pads (99) to the base of the Uprights (97) with four 1” Tek Screws (40).
With the help of a second person, raise the Uprights (97) back to the vertical position.
4.Remove the knob from the pin. Make sure that the collar and the spring are on the pin. (Note: If there are two col- lars, place one on each side of the spring.) Insert the pin into the Latch Insert (114) in the left Upright (97), and tighten the knob back onto the pin.
2 |
|
|
|
|
|
| 39 |
|
|
| 80 |
|
| 115 | 80 |
|
|
| |
|
|
| 39 |
| 39 |
|
|
97 | 80 |
|
|
|
|
| |
115 | 39 |
|
|
|
|
| |
3 |
|
| 40 |
|
|
| |
|
|
| 99 |
| 99 |
| 99 |
| 40 |
| 40 |
97 | 40 |
|
|
|
|
| |
| 99 |
|
|
4 |
|
|
|
| Knob |
|
|
| 114 | Spring |
|
|
|
| |
|
|
| Pin |
| 97 | Collar |
|
|
|
|
7