Healthrider HREL89070 manual Assembly, two adjustable, wrenches, and a rubber mallet, Part Chart

ASSEMBLY

Assembly requires two persons. Place all parts of the elliptical crosstrainer in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.

The following tools are required for assembly: a phillips screwdriver			, two adjustable
wrenches	, and a rubber mallet	.

PART CHART

Use the part drawings below to identify the small parts used in assembly. The number in parenthesis below each drawing refers to the key number of the part. The second number refers to the quantity used in assembly. Note:

Some small parts may have been pre-attached for shipping. If a part is not in the parts bag, check to see if it has been pre-attached.

3/8" x 3 1/2Ó Carriage Bolt (28)Ñ4 3/8" x 1Ó Screw (59)Ñ2

3/8" Nylon Locknut (29)Ñ8	1/4" Nylon Jam Nut (78)Ñ2	1/4" x 1/2Ó Bolt (71)Ñ2
	#8 x 3/4Ó Black Screw (44)Ñ10

3/8Ó Zinc Washer (52)Ñ2

3/4Ó Axle Cap (43)Ñ2*

3/8Ó Lock Washer (58)Ñ2

5/8Ó Axle Cap (50)Ñ2* Plastic Spacer (56)Ñ4 Pedal Arm Spacer (41)Ñ2

*Extra Axle Caps (43, 50) may be included.

4