6.Slide an M8 Split Washer (58) and an M8 Washer (81) onto an Axle Screw (30). Tighten the Axle Screw into one end of the Incline Axle (29). Next, apply a small amount of the included grease to the Incline Axle.

Align the indicated tubes on the Incline Frame (5) with

the tubes on the Base (1). Make sure that the Incline

Frame is turned so the V-shaped grooves are on

top. Insert the Incline Axle (29) through the Incline Frame and the Base. Note: It may be helpful to tap the Incline Axle with a rubber mallet to insert it.

Slide an M8 Split Washer (58) and an M8 Washer (81) onto the other Axle Screw (30). Tighten the Axle Screw into the open end of the Incline Axle (29).

7.The Console (87) requires two 1,5V batteries (not included). Alkaline batteries are recommended. To install batteries, turn the console over and insert two batteries into the battery clip as shown in the inset drawing. Make sure that the negative ends of the

batteries (marked “—”) are touching the springs in the battery clip.

Attach a Plastic Tie (53) to the battery clip as shown.

Attach the Console (87) to the Console Base (49) with four M4 x 16mm Screws (35), making sure that the indicated wires are extending from the Console Base (49). Be careful not to pinch the wires.

8.Connect the Extension Wire (51) to the corresponding wire on the Console (87).

Next, connect the two Pulse Wires (86) to the two remaining wires on the Console (87). Note: Either Pulse Wire can be attached to either wire on the Console.

Next, connect the ground wire to the indicated hole in the Upright (2) with an M4 x 16mm Screw (35).

Carefully feed the wires down into the Upright (2). Attach the Console Base (49) to the Upright with four

M4 x 16mm Screws (35). Be careful to avoid pinch- ing the wires.

7

6

 

 

V-shaped Groove

 

 

 

 

 

 

5

 

 

 

58

 

 

 

81

 

1

 

30

 

 

 

Grease

 

 

Tubes

58

81

 

 

 

 

 

 

 

29

Tubes

 

 

 

30

 

 

 

7

87

 

Batteries

 

 

 

53

 

 

 

Battery

49

 

 

Clip

 

 

 

 

Wires

 

 

 

 

 

35

8

 

 

 

 

 

 

87

 

Console

 

 

 

Wires

 

49

 

 

 

 

86

 

35

 

 

 

 

 

 

51

 

 

 

Ground Wire

 

 

 

35

35

2

 

 

 

 

Page 6 Page 8
Page 7
Image 7
Healthrider HREVEL05983 manual Frame is turned so the V-shaped grooves are on
Page 6 Page 8

HREVEL05983 specifications

The Healthrider HREVEL05983 is a unique piece of fitness equipment designed to deliver a top-notch workout experience for users of varying fitness levels. This elliptical trainer combines innovative technology with ease of use, making it an ideal addition to any home gym.

One of its key features is the 18-inch stride length, which provides a smooth and natural motion suitable for users of all heights. This adjustable stride allows for versatility in workouts, empowering users to modify their stride to optimize comfort and effectiveness. The machine also includes an adjustable ramp, which can be set to different incline levels to engage additional muscle groups and increase workout intensity.

The HREVEL05983 incorporates a built-in heart rate monitor, enabling users to track their heart rate in real time. This is particularly important for those who are serious about maximizing their workouts and ensuring they stay within their target heart rate zone. The dual-action handlebars provide an upper-body workout and engage muscles in the arms, shoulders, and back, enhancing calorie burn and overall workout efficiency.

For added motivation, the Healthrider HREVEL05983 features a variety of built-in workout programs. These pre-set routines cater to different fitness goals, whether it's weight loss, endurance, or general fitness. Each program adjusts the resistance and incline automatically, providing a comprehensive and tailored workout experience.

Another notable characteristic is its large, easy-to-read LCD display, which provides feedback on important metrics such as time, distance, calories burned, and heart rate. This display keeps users informed and motivated throughout their exercise sessions.

Additionally, this elliptical trainer is equipped with a whisper-quiet drive system, making it an excellent choice for home use, especially in shared spaces. The compact design also facilitates easier storage, while the built-in transport wheels offer mobility, allowing users to move the machine effortlessly.

In conclusion, the Healthrider HREVEL05983 is a versatile, feature-rich elliptical trainer that delivers efficient workouts. Its combination of adjustable stride, incline options, heart rate monitoring, and a variety of workout programs provide users with everything they need to maintain a healthy and active lifestyle from the comfort of their home. With its durable construction and user-friendly design, it's a worthwhile investment for those looking to achieve their fitness goals.
Top Page Image Contents