Manuals / Hearth and Home Technologies / Household Appliance / Indoor Fireplace

Hearth and Home Technologies Cinch Pipe & Termination Cap System Burn Risk

Models: Cinch Pipe & Termination Cap System

1 12
Download 12 pages 43.73 Kb
Page 9
Image 9

E. Install the Heat Shield and Horizontal Termination Cap

WARNING

A 1-1/2 in. minimum overlap MUST be maintained on the telescoping fl ue section of the cap.

WARNING

Fire Risk

Exhaust Fumes Risk

Impaired performance of appliance.

•Overlap pipe slip sections at least 2 in.

•Use pilot holes for screws.

•Screws must not exceed 1 in. long.

•Pipe may separate if not properly joined.

on the extended heat shield should rest on the top of the vent (pipe section) to properly space it from the pipe section.

Install the Horizontal Termination Cap

Vent termination must not be recessed in the wall. Siding may be brought to the edge of the cap base.

Caulk the outside edges of the cap.

When installing a horizontal termination cap, follow the cap location guidelines as prescribed by current ANSI Z223.1 and CAN/CGA-B149installation codes.

WARNING

Burn Risk

•Local codes may require installation of a cap shield to prevent anything or anyone from touching the hot cap.

Heat Shield Requirements for Horizontal Termination

For all horizontally vented appliances, a heat shield MUST be placed 1 in. above the top of the vent between the wall shield and the base of the termination cap.

There are two sections of the heat shield. One section at- taches to the wall shield with two screws. The remaining section is attached to the cap in the same manner. See Figure 2.16.

If the wall thickness does not allow the required 1-1/2 in. heat shield overlap, an extended heat shield must be used.

The extended heat shield will need to be cut to the thickness of the wall and be attached to the wall shield. The small leg

Heat Shield or

Rear Vent

Extended

Heat Shield

Heat Shield

1-1/2 in. (38 mm) min.

Wall Shield

overlap

 

Inner Vent

 

Outer Vent

EXTERIOR

INTERIOR

 

SHEATHING

Figure 2.16 Venting through the Wall

WARNING

Do NOT connect a pipe section to a termination cap without using the telescoping fl ue section found on the termination cap.

Note: Where required, an exterior wall fl ashing is available. When penetrating a brick wall, a brick extension kit is available for framing the brick.

Hearth & Home Technologies Inc. • Cinch Pipe & Term Caps • 4033-900 Rev K • 05/05

9

Page 8 Page 10
Page 9
Image 9
Hearth and Home Technologies Cinch Pipe & Termination Cap System Install the Heat Shield and Horizontal Termination Cap
Page 8 Page 10

Cinch Pipe & Termination Cap System specifications

Hearth and Home Technologies has made significant strides in enhancing the efficiency and safety of venting systems with its innovative Cinch Pipe & Termination Cap System. This advanced system addresses the needs of modern heating solutions, offering a reliable and efficient means of venting gas appliances while simplifying installation.

One of the standout features of the Cinch Pipe System is its easy-to-use design. The system utilizes a push-together installation method, which minimizes assembly time and reduces the complexity typically associated with venting systems. This innovative approach enables both DIYers and professionals to install the system with minimal tools and time, making it an attractive option for various settings, including residential and commercial applications.

The Cinch Pipe is crafted from high-quality materials, ensuring durability and longevity. Made from stainless steel, it is designed to withstand harsh weather conditions and resist corrosion, thereby extending the life of the venting system. In conjunction with the termination cap, it provides a secure seal that prevents leaks and ensures proper exhaust flow, contributing to the safe operation of gas appliances.

One of the characteristics that sets the Cinch Pipe apart is its impressive flexibility. The system can be used for a variety of appliance types, including direct vent and B-vent applications. This versatility makes it an excellent choice for builders and contractors who require a reliable venting solution regardless of the project specifications.

Additionally, the termination cap of the Cinch Pipe system is designed with safety in mind. It features built-in insect screens to prevent the entry of unwanted pests while also providing superior weather protection. The cap is engineered to optimize exhaust flow, thereby enhancing the efficiency of the connected appliance.

The Hearth and Home Technologies Cinch Pipe & Termination Cap System exemplifies a commitment to both innovation and safety. With its user-friendly installation, robust construction, and versatile application range, it stands out as a premier choice for those looking for quality venting solutions. This system not only meets the demands of efficiency and safety but also enhances the overall performance of gas-heating appliances, making it an essential component in modern venting technology.