10 Operating Instructions

A. Before Lighting Fireplace

Before operating this fireplace, have a qualified technician:

Remove all shipping materials from inside the firebox.

Review proper placement of logs and lava rock.

Check the wiring and batteries.

Check the air shutter adjustment.

Ensure that there are no gas leaks.

Ensure that the flow of combustion and ventilation air is not obstructed (front grilles).

A guard is recommended for the protection of young children, the elderly or infirm.

Parts sealed by the manufacturer or agent must not be altered by the user.

The fuel bed must not be disturbed, do not burn rubbish.

SWITCH IS SHOWN

IN "ON" POSITION

Figure 10.1 Valve Switch Position

Switch must be in position shown in Figure 10.1 in order for remote control to operate properly.

WARNING

Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Refer to the owner’s information manual provided with this fireplace. For assistance or additional information consult a qualified installer, service agency or the gas supplier.

WARNING

Do NOT use this fireplace if any part has been under water. Immediately call a qualified service technician to inspect the fireplace and to replace any part of the control system and any gas control which has been under water.

WARNING

¨

 

HOT SURFACES!

Glass and other surfaces are hot during operation and cool down.

Hot glass will cause burns.

• Do not touch glass until it is cooled

• NEVER allow children to touch glass

• Keep children away

• CAREFULLY SUPERVISE children in same room as appliance.

• Alert children and adults to hazards of high temperatures.

High temperatures may ignite clothing or other flammable materials.

Keep clothing, furniture, draperies and other combustibles away.

Heat & Glo Lifestyle Collection • Dakota 42-CE4036-915 Rev I • 11/07

17

Page 17
Image 17
Hearth and Home Technologies Dakota 42-CE manual Operating Instructions, Before Lighting Fireplace