3 Framing and Clearances
Note:
•Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY.
•Illustrations/diagrams are not drawn to scale.
•Actual installation may vary due to individual design preference.
A. Select Fireplace Location
When selecting a location for your fireplace it is important to consider the required clearances to walls (See Figure 3.1).
WARNING
Fire Risk
Provide adequate clearance:
•Around air openings.
•To combustibles.
•For service access.
Locate fireplace away from traffic areas.
Note: For actual fireplace dimensions refer to Section 13.
1.47 M
G
F
C | 2.08 M | |
D | ||
|
Note: If this surface is inside the building’s warm air envelope...
B
A | F |
E
...then this surface must be an exterior wall system.
G
F
C
D
E
Figure 3.1 Fireplace Locations
| A | B | C | D | E | F | G |
cm | 62.9 | 61.3 | 121.9 | 124.5 | 1.6 | 1.3 | 3.8 |
WARNING
Fire Risk
Odor Risk
•Install fireplace on hard metal or wood surfaces extending full width and depth of fireplace.
•Do NOT install fireplace directly on carpeting, vinyl, tile or any combustible material other than wood.
WARNING
Fire Risk
•Locate and install fireplace to all clearance specifications in manual.
Heat & Glo Lifestyle Collection • Dakota | 5 |
