3 Framing and Clearances
Note:
•Illustrations reflect typical installations and are FOR DESIGN PURPOSES ONLY.
•Illustrations/diagrams are not drawn to scale.
•Actual installation may vary due to individual design preference.
A.Selecting Appliance Location
When selecting a location for your appliance it is important to consider the required clearances to walls (see figure 3.1).
WARNING
Fire Risk
Provide adequate clearance:
•Around air openings
•To combustibles
• For service access
Locate appliance away from traffic areas.
NOTE: For actual appliance dimensions refer to Sec- tion 16.
B
A
PERPENDICULAR SIDEWALL
CAN OVERLAP TO 4 INCHES
FROM OPENING ON BOTH SIDES
C
D
E
In addition to these framing dimensions, also reference the following sections:
•Clearances and Mantel Projections (Sections 3.C and 3.D)
•Vent Clearances and Framing (Section 6).
| A | B | C | D | E |
Inches | 22 | ||||
Millimeters | 1461 | 559 | 2325 | 1644 | 1162 |
Figure 3.1 Appliance Locations
8 | Heat & Glo • |