Hearth and Home Technologies GBFL4136I Appliance Setup, A. Remove Glass Assembly, D. Accessories

Models: GBST4336I GBFL4136I

1 50
Download 50 pages 62.47 Kb
Page 36
Image 36
14 Appliance Setup

14 Appliance Setup

A. Remove Glass Assembly

See Section 14G.

B. Remove the Shipping Materials

Remove shipping materials from inside or underneath the firebox.

C. Clean the Appliance

Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.

D. Accessories

Install approved accessories per instructions included with accessories. Contact your dealer for a list of ap- proved accessories.

WARNING! Risk of Fire and Electric Shock! Use ONLY Hearth & Home Technologies-approved optional acces- sories with this appliance. Using non-listed accessories could result in a safety hazard and will void the warranty.

E. Lava Rock and Glowing Ember Placement

WARNING! Risk of Explosion! Follow ember placement instructions in manual. DO NOT place embers directly over burner ports. Replace ember material annually. Improperly placed embers interfere with proper burner operation.

Ember material is shipped with this gas appliance. To place the ember material:

Embers CANNOT be placed directly over ports. Care should be taken not to cover the lighting trail of ports (from back to front).

When placing Glowing Embers® onto the burner care should be taken so that the ports are not covered. Place the dime-size ember pieces just in front of the port trail, but not on or in between the ports (see Figure 14.1). Failure to follow this procedure will likely cause lighting and sooting problems.

Place Glowing Embers on top of the log attachment tabs to conceal their location. Ensure that the Glowing Embers do not obstruct the port trail.

Place Lava Rock on the base pan away from burner. Use this material to give the appliance a realistic ash bed.

Save the remaining ember materials for use during appliance servicing. The embers provided should be enough for 3 to 5 applications.

DO NOT PLACE EMBERS

IN THE CIRCLED AREAS

PILOT LOCATED HERE

Figure 14.1 Placement of Embers

36

Heatilator • GBST4336I, GBFL4136I • 2135-900 Rev. D • 11/08

Page 36
Image 36
Hearth and Home Technologies GBFL4136I Appliance Setup, A. Remove Glass Assembly, B. Remove the Shipping Materials