Hearth and Home Technologies GBFL4136I, GBST4336I owner manual Model GDCR4136I, 1 in

C 2 B PILOT

2 D

Figure 5. Placement of Log #2

B

2

BURNER EDGE

Figure 6. Placement of Log #2

PILOT

STEP 2. Log #2 (SRV2129-705):Locate portion of Log #2 that is highlighted in Figure 5. Place that portion of Log #2 on the indentation on Log C. Log #2 will rest on the tip of Log B. Slide the bottom of Log #2 up to the edge of the burner as shown in Figure 6.

PILOT

3

Figure 7. Placement of Log #3

PILOT

1 in.

2

D

Figure 8. Placement of Log #3

STEP 3. Log #3 (SRV2129-707):Place Log #3 so that it rests on the indentations located on Log #2 and Log D. Log 3 should extend beyond Log #2 by one inch.

Model: GDCR4136I

A

1

B

Figure 9. Placement of Log #1

A1

B

Figure 10. Placement of Log #1

STEP 1. Log #1 (SRV2129-704):Place Log #1 on Log A. The end and bottom of Log #1 fit into the indentation on Log A highlighted in Figure 9. The Y-shaped end of Log #1 will rest on the smooth area of Log B as shown in Figure 10.

38 Heatilator • GBST4336I, GBFL4136I • 2135-900 Rev. D • 11/08