2.2FAN OPERATION

The accessory fan is wired in series with a speed con- trol switch and a temperature sensor switch. Set the speed control to an "ON" position and light the heater. The temperature sensor switch will automatically start the fan when the switch warms up—and stop the fan when it cools down. You can manually stop the fan by turning the speed control switch to "OFF". See Figure 32 for fan wiring diagram.

3.0SERVICING AND MAINTENANCE

A. HEATER SERVICING: Frequency of heater servic- ing will depend upon use and type of installation.

B.IMPORTANT: TURN OFF GAS AND ELECTRICAL POWER BEFORE SERVICING APPLIANCE. IT IS RECOMMENDED THAT A COMPETENT SERVICE TECHNICIAN PERFORM SERVICE CHECK-UPSAT THE BEGINNING OF EACH HEATING SEASON.

C.The appliance and flue system should be inspected before initial use and at least annually by a qualified field service person.

D.Inspect the external flue cap on a regular basis to make sure that no debris is interfering with the air flow.

E.Keep the control compartment, logs, and burner area surround the logs clean by vacuuming or brushing at least twice a year.

CAUTION: THE LOGS GET VERY HOT - HANDLE ONLY WHEN COOL.

WARNING: DO NOT USE ABRASIVE

!CLEANERS ON THE GLASS DOOR AS- SEMBLY. DO NOT ATTEMPT TO CLEAN THE GLASS DOOR WHEN IT IS HOT.

F.The glass door should be cleaned using a house- hold glass cleaner. DO NOT handle or attempt to clean the glass when it is HOT.

G.Visually inspect the flexible power supply cord; if damaged, contact the service agent for a special replacement cord assembly.

H.In order to properly clean the burner and pilot as- sembly, turn off the gas to the unit and remove the logs exposing the burner and pilot assembly. Clean all foreign materials from top of burner. Check to make sure that the burner orifice is clean.

Visually inspect the pilot periodically. Brush or blow away any dust or linen accumulations. If the pilot ori- fice is plugged, disassembly may be required to re- move any foreign materials from the orifice or tubing.

When the appliance is put back in service check burner flame patterns with Figure 38.

To obtain proper operation, it is imperative that the pi- lot and main burner flame characteristics are steady, not lifting or floating. Typically, the top 3/8-inch (10m) of the thermocouple should be engulfed in the pilot flame (Figure 39).

MAKE SURE THE FLAMES

ARE STEADY—NOT

LIFTING OR FLOATING.

Figure 38.

Pilot Assembly

Figure 39.

Heat & Glo • SL-350TRSI-AUE • 2089-902 Rev. B • 6/06

32

Page 31 Page 33
Page 32
Image 32
Hearth and Home Technologies SL-350TRSI-AUE manual FAN Operation, Servicing and Maintenance
Page 31 Page 33

SL-350TRSI-AUE specifications

The Hearth and Home Technologies SL-350TRSI-AUE is a remarkable addition to the realm of contemporary fireplace solutions, designed to enhance both aesthetics and functionality in homes. This model exemplifies the company’s commitment to creating high-quality heating appliances that not only provide warmth but also serve as a stunning centerpiece for any living space.

One of the key features of the SL-350TRSI-AUE is its state-of-the-art linear design. This fireplace is constructed to provide a clean, modern aesthetic that seamlessly integrates into a variety of interior styles. With a sleek frame and expansive glass viewing area, it offers a panoramic view of the flames, allowing for an immersive experience. The linear orientation also creates a more open feel in a room, making it a favored choice for contemporary living spaces.

In terms of technology, the SL-350TRSI-AUE is equipped with advanced direct vent capabilities, ensuring efficient combustion and enhanced safety. The direct vent system pulls air from outside for combustion and exhausts directly outside, maintaining indoor air quality and optimizing heating efficiency. This is particularly beneficial in energy-smart homes, where maintaining indoor air quality is paramount.

The fireplace also features a powerful, adjustable flame control, enabling users to customize their heating experience according to personal preferences. With its thermostat compatibility, homeowners can set their desired temperature, and the fireplace will automatically adjust to provide consistent warmth. This smart heating solution ensures comfort throughout the colder months while also keeping energy consumption in check.

With regard to installation, the SL-350TRSI-AUE offers versatility. Its flexible venting options allow for installation in various locations, whether it be on an exterior wall or in a basement. The unit is designed to work under a variety of building conditions, providing engineers and contractors with greater flexibility during the design and installation processes.

Additionally, the fireplace features a minimalist remote control, allowing users to operate the unit effortlessly from anywhere in the room. The combination of these features makes the Hearth and Home Technologies SL-350TRSI-AUE a practical yet stylish choice for those seeking an efficient and visually appealing heating solution. With its blend of modern design, advanced technology, and functionality, it stands out as an exemplary product in the competitive fireplace market.
Top Page Image Contents