Heat & Glo LifeStyle ST-42TVFL-IPI Step Positioning Leveling, and Securing the, Fireplace

Step 5

Positioning,

Leveling, and

Securing the

Fireplace

1.Place the fireplace into position.

2.Level the fireplace from side to side and from front to back.

3.Shim the fireplace with non-combustible material, such as sheet metal, as necessary.

4.Secure the fireplace to the framing by nailing or screwing.

The diagram below shows how to properly position, level, and secure the fireplace.

NAILING TABS

AT BASE OF

FIREPLACE.

16

Step 6

The Gas Control

System

Figure 8. Proper Positioning, Leveling, and

Securing of a Fireplace

!WARNING: THIS UNIT IS NOT FOR USE WITH SOLID FUEL.

Intermittent Pilot Ignition (IPI) System

This system includes 3V control valve, electronic module and intermittent pilot.

WARNING: 110-120 VAC MUST NEVER

!BE CONNECTED TO A CONTROL VALVE IN A MILLIVOLT SYSTEM.

Heat & Glo • ST-42TVFL-IPI • 455-902 Rev. C • 12/07