Heat & Glo LifeStyle ST-42TVFL-IPI owner manual Step Framing the Fireplace, Framing Dimensions

Step 2

Framing the

Fireplace

CAUTION

Minimum Clearances from the B-Type Vent Pipe to Combustible Materials is 1 inch (25 mm) all around the pipe.

Fireplace framing can be built before or after the fireplace is set in place. Framing should be positioned to accommodate wall coverings and fireplace facing material. The diagram below shows framing reference dimensions.

MEASURE FIREPLACE DIMENSIONS, AND VERIFY FRAMING METHODS AND WALL COVERING DETAILS, BEFORE FRAMING CONSTRUCTION BEGINS.

10

ST-42TVFL-IPI

C

B

A

MODEL	A	B	C
ST-42TVFL-IPI	44	23 1/4	41 1/2

Dimensions shown in inches.

Figure 4. Framing Dimensions

Heat & Glo • ST-42TVFL-IPI • 455-902 Rev. C • 12/07