GLASS REPLACEMENT
1. | Remove door from stove and lay |
|
|
|
|
|
| ||
|
|
| ||
| on a padded flat surface. |
|
|
|
2. | Remove glass tabs (See figure |
|
|
|
| 25) and screws with a Phillips |
|
|
|
|
|
|
| |
| screwdriver (turn screws counter- |
|
|
|
| clockwise). |
|
|
|
3. | Lift glass frame pieces and glass |
|
|
|
| out of the door frame. |
|
|
|
4. | Lay new glass with fiberglass tape |
|
|
|
| around it into the door frame, mak- |
|
|
|
| ing sure the |
|
|
|
| correctly to the outside. |
|
|
|
5. | Place glass frame pieces over the |
|
|
|
| fiberglass tape on the edges of the |
|
|
|
| glass. Be sure glass is centered |
|
|
|
| in the opening (i.e., same space |
|
|
|
| top and bottom, left and right | FIGURE 25 |
| |
| sides). |
| ||
|
|
|
| |
|
|
|
|
|
6.Reinstall screws and glass tabs tight enough to hold glass and frame in place. DO NOT OVER-
TIGHTEN.
7.Check again for centering of glass in door frame, and give all screws a final tightening.
DOOR HANDLE ASSEMBLY
NOTE: Spring handle not included in door handle assembly. When replacing door handle, either use old spring handle or order new spring handle separately (See Figure 26).
FIGURE 26 |
23 |
