Heath Zenith 598-1165-03 warranty Operation, Features, Requirements, Mode Switching Summary

Motion Sensing Coach Lights

Features

•Light comes on when motion is detected.

•Automatically turns light off.

•Photocell keeps the light off during daylight hours.

This package includes:

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 10 Min		x
Manual	To Dawn*		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST
Set the ON-TIME switch	ON-TIME
on the bottom of the cover
plate to TEST.
	TEST 1 5 10 MIN
AUTO
Set ON-TIME switch to 1,	ON-TIME
5, or 10 minutes.
	TEST 1 5 10 MIN

MANUAL MODE

•Lantern

•Easy to use Universal Mounting Bracket

•Mounting Hardware

•Wire Connectors

•Some Models Include an Optional Decora- tive Tail Assembly

Requirements

•	The Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control
	must be wired through a switch.
•	Some electrical codes require installa-

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1Second OFF then...

... back on.

tion by a qualified electrician.

Before installation, record the model number from back of fixture below. Attach receipt in case of possible war- ranty issues.

Mode Switching Summary

	TEST	ON-TIME Switch at 1, 5,
			or 10 minutes
	AUTO		Flip light switch
			off for one second
MANUAL MODE
			then back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

© 2006 DESA Specialty Products™ 598-1165-03