COMPLETE THE INSTALLATION

Stuff the wires into the junction box. Make sure the wires from the fixture go through the wire path, and no wires get pinched.

Slide the fixture onto the

Junction

mounting screws and

Box

tighten nuts.

 

4162 Top Assembly

Larger piece

on top

Optional Assembly

If so equipped, you may install the decora- tive tail as shown below.

Hex nut

Caulk fixture mounting surface with silicone weather sealant.

Install one 100 Watt maximum light bulb.

If so equipped, install the fixture top.Secure with decorative screws.

If you will not be installing the optional tail assembly, install the decorative nut onto the bottom of the fixture now.

1.Screw in extension bar.

Bottom trim piece has drain hole

2.Add tail piece and trim.

3.Install

decorative nut.

598-1165-03

Page 4
Image 4
Heath Zenith 598-1165-03 warranty Complete the Installation, Top Assembly