TEST AND ADJUSTMENT
❒Turn on the circuit breaker and light switch.
NOTE: Sensor has about 1 1/2 minutes warm up period before it will detect motion. When first turned on, wait about 1 1/2 minutes.
❒Turn the RANGE control to the mid position and the
RANGE | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 5 1 TEST
MIN MAX
Bottom of Sensor
Avoid aiming the control at:
¥Objects that change temperature rapidly, such as heating vents and air conditioners. These heat sources could cause false triggering.
¥Areas where pets or traffic may trigger the control.
¥Nearby large,
180°
8ft.
(2.4 m)
70 ft.
(21 m)
Maximum Range | Maximum |
| Coverage Angle |
The detector is most sensitive to motion across its field of view.
❒ Loosen the clamp screw in | Clamp | |
the sensor ball joint and gen- | ||
Screw | ||
tly rotate the sensor. | ||
| ||
❒ Walk through the coverage | Ball | |
area noting where you are | ||
Joint | ||
when the lights turn on (also, | ||
| ||
theLEDwillflashseveraltimes |
| |
when motion is detected). |
| |
Move the sensor head up, |
| |
down, or sideways to change | Aim Sensor | |
the coverage area. Keep the | Down for Short | |
sensor at least 1" (2.5 cm) | ||
Coverage | ||
away from the lamp. | ||
|
❒Adjust the RANGE as needed. RANGE set too high mayincreasefalsetriggering.
❒ Secure the sensor head by tightening the clamp screw. Do not overtighten the screw.
❒Set the amount of TIME you want the lights to stay on after motion is detected (1, 5, or 10 minutes).
SPECIFICATIONS
Range . . . . . . . . . . . . . Up to 70 ft. (21 m) [varies with surrounding temperature].
Sensing Angle . . . . . . . Up to 180°
Electrical Load . . . . . . . Up to 250 Watts Maximum In- candescent.
Power Requirements . . 120 VAC, 60 Hz
Operating Modes . . . . . TEST, AUTO and MANUAL
MODE
Time Delay . . . . . . . . . 1, 5, 10 minutes Replacement lamp . . . T3, 250W (or less) halogen
120 VAC
DESA Specialty Productsª reserves the right to discon- tinue products and to change specifications at any time without incurring any obligation to incorporate new fea- tures in products previously sold.
Motion
Motion
| Sensor |
Least Sensitive | Most Sensitive |
3 |