4 | Getting Started | Installer Guide |
| ||
|
|
A. Typical Appliance System
NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual
HORIZONTAL
TERMINATION CAP (SECTION 8.A)
FRAMING/HEADER (SECTION 5.B)
Figure 4.1 Typical System
MAINTAINS MINIMUM CLEARANCE AROUND PIPE (SECTION 10.C) 
VERTICAL TERMINATION CAP (SECTION 10.C)
STORM COLLAR (SECTION 10.C)
VENT PIPE PENETRATES ROOF
PREFERABLY WITHOUT AFFECTING
ROOF RAFTERS (SECTION 8.C )
ATTIC INSULATION SHIELD (NOT
SHOWN) MUST BE USED HERE
TO KEEP INSULATION AWAY
FROM VENT PIPE IF ATTIC IS
INSULATED (SECTION 8.D )
VENT PIPE (SECTION 8 and 10)
FRAMING HEADED OFF IN CEILING JOISTS (SECTION 8.C)
CEILING FIRESTOP ON FLOOR OF ATTIC (SECTION 8.C)
OPTIONAL
WALL SWITCH
GAS LINE
(SECTION 11.C)
HEARTH EXTENSION
SURROUND
MANTEL AND MANTEL LEG (SECTION 5.D)
16 | Heatilator • GDST3831I • |
