Heatiator owner manual Log Set Assembly LOGS-2126, Models ST-550T-IPI.GDST3831I

F. Install the Log Assembly

Log Set Assembly: LOGS-2126

Models: ST-550T-IPI. GDST3831I

1 3 2

PILOT

STEP 1. CAUTION! Logs are fragile! Carefully remove the microfoam and packaged logs from the inside of the fireplace. See Figure 2. Remove the Mystic Embers and mineral wool and set aside. Remove the packaging from the logs and inspect the logs for damage. To ensure that you are working on the correct side of the appliance, verify that the pilot is on the left side. See Figure 2.

1

1

STEP 2. Log #1 (SRV2126-700):Place Log #1 so that the large cutout on the bottom of the log fits over the pilot shield as shown in Figure 4. The hole in the bottom of Log #1 interlocks with the head of the shoulder screw on the burner.

2

2

STEP 3. Log #2 (SRV2126-701):Place Log #2 as shown in Figure 6 using the shoulder bolt as a guide to align the

log in the proper orientation to the port pattern on the burner. 2126-935

Heatilator • GDST3831I • 2127-900 Rev. K • 7/12 49