Fujitsu FPCR35161 System Properties screen You have a memory failure, You have the wrong I/O

Problem	Possible Cause	Possible Solutions
System Properties screen	You have a memory failure.	Check for Power On Self Test (POST) messages. See “Power On Self Test Messages” on
doesn’t show correct		page 76.
installed memory amount.
(continued)
USB Device Problems

You have installed a USB device, but the notebook does not recognize the device, or the device does not seem to work properly.

ExpressCard Problems

The device is not properly	Remove and re-install the device. See “Device Ports” on page 61.
installed.
The device may have been	Close the application and restart your notebook.
installed while an application
was running, so your notebook
is not aware of its installation.
Your device doesn’t have the	See your software documentation and activate the correct driver.
correct driver.

An ExpressCard is inserted but does not work or is lock- ing up the system.

Power Failures

You have the wrong I/O	See your ExpressCard documentation to determine the required I/O address. Change
address selected for your card	the settings in the Device Manager
device.
The card is not properly	Remove and re-install the card. See “Using ExpressCards” on page 54.
installed.
The card may have been	Close the application and restart your notebook.
installed while an application
was running, so your notebook
is not aware of its installation.
You don’t have the correct	See your software documentation and activate the correct driver.
driver active.

You turn on your LIFEBOOK notebook and nothing seems to happen.

The battery is installed but is faulty.

Use the Status Indicator panel to verify the presence and condition of the battery. See “Status Indicator Panel” on page 20. If a battery is indicating a short, remove that bat- tery and operate from another power source or replace that battery.

70 - Troubleshooting