Fujitsu FPCR47651, FPCR35161, AH532 manual To recover from D drive or external storage device

partition, restore backup image(s) created by you or images stored on DVD discs, and perform a full hard drive recovery. Please refer to instructions above for details on how to create Factory Image Recovery DVDs, user backup DVDs and system image backup.

To recover from D: drive or external storage device:

1Click [User System Backups]

2The progress bar screen is followed by EULA screen. Click [Agree] to accept the EULA.

3On “Select an image to restore” screen select the image to restore from the list of images and click [Next].

4Click [Start] on the “Confirm before restoration” screen to begin the restoration process.

5Once restoration finishes, click [Close] in the “Finished restoration” screen; the computer will restart to Windows.

To restore from the Factory Image (hidden partition):

1Click [Restore C: drive].

2The progress bar screen is followed by “Restore Factory Image (only C: drive) screen confirming that the Factory

Image will be restored to the C: drive and D: drive data will remain. Click [Next].

3Read the instruction screen and select [Agree], then [Next].

4Click [OK] to the warning message to restore factory image to the C: drive.

5When the progress bar screen, wait for the process to complete.

6Click [Finish] when the process completes; the computer will restart to Windows.

To restore full hard drive:

Follow the steps in section “Recovering your Factory Image using Recovery and Utility (for new hard drive or non-bootable hard drive)”

Utility tool: The Utility tool contains two options: Hard Disk Data Delete and Partition Creation.

84 - Restoring Your System Image and Software