Fujitsu AH532 manual Display goes blank by, Itself after you have been Video timeout, Standby, or

Problem	Possible Cause	Possible Solutions
The display goes blank by	The notebook has gone into	Press any button on the keyboard, or move the mouse to restore operation. If that fails,
itself after you have been	Video timeout, Standby, or	push the Power/Suspend/Resume button. Check your power management settings, or
using it.	Save-to-Disk mode because	close your applications and go to the Power Savings menu of the setup utility to adjust
	you have not used it for a	the timeout values to better suit your operation needs. See “BIOS Setup Utility” on
	period of time.	page 38.
	Power management timeouts	Press any button on the keyboard, or move the mouse to restore operation. If that fails,
	may be set for short intervals	push the Power/Suspend/Resume button. (The display may be shut off by Standby
	and you didn’t notice the dis-	Mode, Auto Suspend or Video Timeout)
	play come on and go off.
Your display won’t turn on	The system may be password-	Check the status indicator panel to verify that the Security icon is blinking. If it is blink-
when the system is turned	protected.	ing, enter your password.
on or when it has resumed.
The display does not close.	A small object such as a paper	Remove all foreign objects from the keyboard.
	clip is stuck between the dis-
	play and keyboard.
The display has bright or	If the spots are tiny and few,	This is normal; do nothing.
dark spots.	this is normal for a large LCD
	display.
	If the spots are numerous or	Display is faulty; contact your support representative.
	large enough to interfere with
	your operation needs.
The application display	You’re running an application	Display compression gives a clearer but smaller display for applications that do not
uses only a portion of your	that doesn’t support the sys-	support the system’s native pixel resolution. You can fill the screen but have less reso-
screen and is surrounded by	tem’s native pixel resolution	lution by changing display compression settings. These settings can be changed in the
a dark frame.	and display compression is	Intel GMA control panel.
	enabled.
The Display is dark when on	Power Management default is	Press [Fn] + [F7] to increase brightness or double-click on the battery gauge and
battery power.	set on low to conserve power.	adjust Power Control under battery settings.

74 - Troubleshooting