Fujitsu FPCR35161, FPCR47651, AH532 manual Restoring Your System Image and Software

•The Hard Disk Data Delete utility is used to delete all data on the hard disk and prevent the data from being reused. NOTE: Do not use the Hard Disk Data Delete utility unless you are absolutely certain that you want to erase your entire hard disk, including all partitions.

To delete hard disk data:

a.Click the [Hard Disk Data Delete] button

b.The progress bar appears, followed by the EULA screen.

c.Agree to the EULA and click [Next].

d.Choose the hard disk from which the data should be deleted in the list of hard disks and click [Next].

•The Partition Creation utility is used to change the C: and D: drive partition sizes. To run this utility:

a.Click the [Partition Creation] button.

b.A progress bar screen appears, followed by the EULA screen. Agree to the EULA.

c.On the Recovery Tool - Partition Creation screen move the slider to set disk size, then click [OK].

d.Click YES in the Partition Creation confirmation dialog.

Recovering your Factory Image using Recovery and Utility (for new hard drive or non-bootable hard drive) If you have installed a new hard drive or your hard drive is not bootable, perform the following steps.

1Power on your system. When the Fujitsu logo appears on the screen, press the [Enter] key.

2Highlight the CD/DVD option from the Boot Menu and press [Enter].

3Insert the bootable disc in your DVD drive, then click [OK].

4Select CD/DVD boot mode: UEFI Mode and press [Enter]. While the files are being loaded from the disc, Fujitsu logo screen will appear followed by a progress bar screen at the bottom of the screen.

5Choose your language ([English or French).

6Three tool options appear: Diagnostics, Recovery and Utility. Select [Recovery].

7Select [Restore full hard drive].

8Click [Next] to confirm full hard drive restoration. (All data on HDD will be deleted).

9Agree to EULA by selecting [Agree] option and clicking [Next].

85 - Restoring Your System Image and Software