Fujitsu AH532, FPCR47651, FPCR35161 manual Troubleshooting the Wlan, Troubleshooting Table

Troubleshooting the WLAN

Troubleshooting Table

Causes and countermeasures for troubles you may encounter while using your wireless LAN are described in the following table.

Problem	Possible Cause	Possible Solution
Unavailable	Incorrect network name	Ad hoc connection: verify that the network names (SSID’s) and network keys
network	(SSID) or network key	(WEP) of all computers to be connected have been configured correctly. SSID’s
connection		and WEP key values must be identical on each machine.
		Access Point (Infrastructure) connection: set the network name (SSID) and
		network key to the same values as those of the access point.
		Set the Network Authentication value identically to that of the Access Point.
		Please consult your network administrator for this value, if necessary.
	Weak received signal	Ad hoc connection: Retry connection after shortening the distance to the
	strength and/or link	destination computer or removing any obstacles for better sight.
	quality	Access Point (Infrastructure) connection: Retry connection after shortening the
		distance to the access point or removing any obstacles for better sight.
	The WLAN device has	Check if the wireless switch is turned ON. Also verify “Disable Radio” is not
	been deactivated or	checked in “Network setting” window.
	disabled
	The computer to be	Check if the computer to be connected is turned ON.
	connected is turned off

122 - Troubleshooting the WLAN