14 Appliance Setup
A. Remove Fixed Glass Assembly
See Section 14G.
B. Remove the Shipping Materials
Remove shipping materials from inside or underneath the firebox.
C. Clean the Appliance
Clean/vacuum any sawdust that may have accumulated inside the firebox or underneath in the control cavity.
D. Accessories
Install approved accessories per instructions included with accessories. Contact your dealer for a list of ap- proved accessories.
WARNING! Risk of Fire and Electric Shock! Use ONLY Hearth & Home
E. Lava Rock, Mystic Embers and Glowing Ember Placement
WARNING! Risk of Explosion! Follow ember placement instructions in manual. DO NOT place embers directly over burner ports. Replace ember material annually. Improperly placed embers interfere with proper burner operation.
Placing the Ember Material
Ember material is shipped with this gas appliance. To place the ember material:
•Embers CANNOT be placed directly over ports. Care should be taken not to cover the lighting trail of ports (from back to front).
•When placing Glowing Embers® onto the burner care should be taken so that the ports are not covered. Place the
DO NOT PLACE GLOWING |
EMBERS IN THE CIRCLED AREA |
= MYSTIC EMBERS |
= GLOWING EMBERS |
Figure 14.1 Placement of Embers |
•Place Lava Rock on areas of base pan away from the burner. Use this material to give the appliance a realistic ash bed.
•Save the remaining ember materials for use during appliance servicing. The embers provided should be enough for 3 to 5 applications.
•Place Mystic Embers on burner and away from the flames to give the appliance a realistic ash bed.
48 | Heatilator • GDST3831I • |
