Model
| G L O S S A R Y |
| HENNY PENNY HOLDING CABINETS |
air temperature probe | a round device located inside the cabinet that measures the inside air |
| temperature and sends that information to the control panel |
concentration ring assembly | a metal assembly located in the water pan in the bottom of the unit that |
| helps keep an even humidity level inside the cabinet |
clean water pan setpoint | a preset temperature at which a sensor warns the operator that the water pan |
| has excessive lime deposits |
control panel | the components that control the operating systems of the unit; the panel is |
| located on the top, front surface of the cabinet |
deliming agent | a cleaner used to remove lime deposits in the water pan |
drain valve | a device that lets the water drain from the water pan into a shallow pan on |
| the floor; the valve should be closed while the unit is in use if humidity is |
| desired |
float switch | a device that senses low water levels in the water pan |
food probe | a sensor located outside the cabinet that, when inserted into the product, |
| communicates the temperature of the product to the control panel |
food probe receptacle | the connection where the food probe is inserted in order to communicate |
| with the control panel |
humidity sensor | a device that measures the percentage of humidity inside the cabinet during use |
humidity setting | a preset moisture level at which the cabinet operates; this setting is |
| programmed at the factory but can be changed in the field |
LED | an electronic light on the control panel |
minimum holding temperature | the lowest temperature at which a food product can be safely held for |
| human consumption |
module | the removable top part of the cabinet that contains all of the operating |
| system |
out of water trip point | a preset temperature at which a sensor warns the operator that the water |
| pan needs refilled |
parameters | a preset group of setpoints designed for holding specific food products at |
| certain temperature and humidity levels |
power switch | the ON/OFF switch that sends electricity to the unit’s operating systems; |
| this switch does not disconnect the electrical power from the wall to the unit |
pressure sprayer | a device that shoots a stream of water under pressure; this device should |
| NOT be used to clean a holding cabinet |
103 |