Hitachi 232133 manual Technical Data, Dimensions, Accessories

Apply other language here

Technical Data

Power Requirements . . .	. . . . . . . . . . 120 VAC, 60 Hz,	Inlet Paint Strainer . . .	. . . . . . . . . 16 mesh (975 micron)
	1 phase, 15A minimum		Stainless Steel Screen, reusable
Generator	. . . . . . . . . . 3000W minimum	Outlet Filter	. . . . . . . . . 60 mesh (238 micron)
Working Pressure Range	. . . . . . . . . . . . . . . 0–3000 psi	Pump Inlet Size	. . . . . . . . . . . . . . . . . . . . 3/4 npt(f)
	(0–210 bar, 21 MPa)	Fluid Outlet Size . . . .	. . . . . . . . . . . . . . . . . . . . 1/4 npsm
Motor	. . . . . . . . . . . . . . . . . . . 0.9 HP	Wetted Parts:	. . . . . . Zinc-plated carbon steel,
with latex at 2000 psi (138 bar, 13.8 MPa)			Aluminum, Stainless steel,
Cycles/Gallon (liter)	. . . . . . . . . . . . . . . . 566 (150)		Polyethylene, DelrinR, Leather
Maximum Delivery Rating	. . . . . . . . 0.6 gpm (2.3 lpm)	Tungsten carbide, Chrome plating, Polyurethane
Tip Size	. . . one gun to 0.026 new tip	NOTE: Delrin
with latex at 2000 psi (138 bar, 13.8 MPa)		Delrin® is a registered trademark of the DuPont Company.
Power Cord	14 AWG, 3 wire, 15 ft (4.5 m)

Dimensions

Models 232132 and 232133		Models 232130 and 232131
Weight (dry w/o packaging)	. . 61 lb (27.7 kg)	Weight (dry w/o packaging)	. . 73 lb (33.1 kg)
Length	25.5 in. (648 mm)	Length	. 21 in. (533 mm)
Width	. 15 in. (381 mm)	Width	20.5 in. (521 mm)
Height	. 20 in. (508 mm)	Height (Handle Down)	28.5 in. (711 mm)

Accessories

DANGER LABELS

The English language DANGER label shown on page 4 is also on your sprayer. If you have painters who do not read English, order one of the following labels to apply to your sprayer. The drawing below shows the best place- ment of these labels for good visibility.

Order the labels directly from Graco, free of charge: 1–800–328–0211

French	187784
Spanish	185956
German	185961
Greek	186041
Korean	186045
English	187791	7728A

308801 31