First time use
Connecting External Video Sources
The front panel jacks are provided as a convenience to allow you to easily connect your video camcorder, digital camera or Digital Video Camcorder as shown in the following examples:
| Left Side Panel |
| Left Side Panel |
| |
INPUT 5 |
| INPUT 5 |
|
| |
| IEEE1394 | PHOTO |
| IEEE1394 | PHOTO |
R L/MONO | DV INPUT | INPUT | R L/MONO | DV INPUT | INPUT |
AUDIO | VIDEO |
| AUDIO VIDEO |
|
|
|
|
| Ferrite Core Instructions: |
|
|
| 1. Wrap once the USB cable or IEEE |
| |||
|
| 1394 cable (not supplied) on the | Ferrite | Ferrite | |
|
| ferrite core near the Photo Input | Core | Core | |
|
| or IEEE 1394 Input as shown. |
|
| |
2. Fold and close the ferrite core while being careful not to pinch the cable.
USB
Cable
Digital Camera
Video Camera | Digital Video Camcorder |
NOTE: 1. Completely insert connection cord plugs when connecting to left side panel jacks. If you do not, the played back picture may be abnormal.
2.If you have a
3.If you have a mono VCR, insert the audio cable into the left audio jack of your TV.
4.
5.If you have a VHS or 8mm camcorder, use the
The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your Plasma TV is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs.
The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features. For best performance, video and audio cables should be made from coaxial shielded wire.
Before Operating External Video Source
Connect an external source to one of the INPUT terminals, then press the INPUTS button to show the
INPUTS menu. Use the CURSOR PAD ( | and ) to select the Antenna or Input of your choice. Then press |
the SELECT button or the CURSOR PAD | to confirm your choice (see page 27). |
Photo Input
IEEE 1394
Cable
Air
Input 1
Move SEL Sel.
14
