Hitachi 42HDX62 When an IEEE1394 device is not connected, When an IEEE1394 device is connected

The Remote Control

How to Use the Remote to Control Your TV

IEEE1394

Use this function to control your devices with digital interface capabilities.

When an IEEE1394 device is not connected

INPUTS

Photo Input

IEEE 1394

Cable

Air

Input 1

Move SEL Sel.

Device not detected

When an IEEE1394 device is connected

INPUTS

Input 5

Photo Input

IEEE 1394

Cable

Air

Move SEL Sel.

IEEE1394		DEVICE NAME, BRAND NAME
DVHS1		POWER	TV	TV	RESET
					00:00:00
		STD		Counter:-00:03:31
Move	SEL	Select

IEEE1394		DEVICE NAME, BRAND NAME
DVHS1		POWER	TV	TV	RESET
					00:00:00
		STD		Counter:-00:03:31
Move	SEL	Select

1.Press INPUT button, CURSOR PAD and SELECT button to select IEEE 1394.

2. Use CURSOR PAD	to select connected device
(example D-VHS1).

3.Use CURSOR PAD cursors to highlight POWER.

4.Press the SELECT button to power on the device.

5.Use CURSOR PAD cursors to select D-VHS operation.

6.Press down on the CURSOR PAD to enable the selected operation.

7.Use CURSOR PAD cursors to highlight the TV IN/OUT operation.

8.Press the SELECT button to select: TV IN is DVHS

TV OUT is Cable

NOTES: 1. The digital device will be automatically recognized if properly connected.

2.Four (4) IEEE1394 devices can be listed on the menu, but only one device at a time can be used. If a fifth device is connected, it will replace the first device on the menu list.

3.The On-Screen display will not disappear until the EXIT button is pressed.

4.Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other manufacturers devices should be brought to the attention of those manufacturers.

5.TV IN/OUT functions are not available when D-VHS is in playback or recording.

6.Digital channels may contain Copy Control Information (CCI). When using a CableCARD, this CCI data will prevent recording of some programs depending on its content value.

30