57” DISASSEMBLY/ASSEMBLY INSTRUCTIONS
2 - RE-ASSEMBLY PROCEDURE
STEP 8
To re-assemble the set, lift the top portion and align onto the bottom cabinet. Gently lower the top portion until it sits flush on the bottom.
STEP 9
Re-install the joint connector bolts (4 pcs.) that were removed in step 5 of the disassembly.
Re-install the top (4) four screws into the lower rear cover, see (a). Re-install the (4) four side screws that hold the back cover to the cabinet, see
(b).
(b)
Re-connect the sensor connector to the sensor board, see (a). Re-install the sensor box, see (b).
(b)
Re-install 4 screws ( , ,, ) that hold the screen frame to the cabinet on the Right side, see (a) and (b). Repeat to re-install 4 screws on the Left side.
(b)
Please re-install 3 screws
STEP 13 ( , ,) below screen frame that hold the back cover to the cabinet as the arrows shows.
(a)Left Side
Please re-install 3 screws
( , ,) below screen frame that hold the back cover to the cabinet as the arrows shows.
(b)Right Side
STEP 14
Re-install both of the front decoration panels, see (a) and (b).. Re-install the speaker grille, aligning it with the bottom cabinet, see (c). This com- pletes the Disassembly and Assembly instructions.
