SETUP
Video 2 Auto Link
Use this function to automatically turn the TV on and tune to Video2 when it detects a video signal to input 2.
Setup |
|
|
|
|
Set The Inputs |
|
|
| |
| Rename List |
|
| |
Video1 | AVR | DVD | PVR | STB2 |
Video2 | CAM | DVD2 | PVR2 | VCR |
Video3 | CBL | DVD3 | SAT | VCR2 |
Video4 | CBL2 | LD | STB | VCR3 |
Video5 | Reset |
|
|
|
Move | SEL Return |
|
|
|
Setup |
|
|
|
|
|
Set The Inputs |
|
|
| ||
|
| Rename List |
|
| |
Video1 |
| AVR | DVD | PVR | STB2 |
Video2 |
| CAM | DVD2 | PVR2 | VCR |
Video3 |
| CBL | DVD3 | SAT | VCR2 |
Video4 |
| CBL2 | LD | STB | VCR3 |
Video5 |
| Reset |
|
|
|
| Auto Link |
|
|
| |
|
| Auto | Remote | Off |
|
Move | SEL | Return |
|
|
|
Use the CURSOR buttons, then press the SELECT button to change AUTO LINK setting.
When AUTO is selected, the TV will turn on and tune to Video2 automatically, when the Video2 input device is turned on. This is con- venient when you want to watch a movie with your VCR, laserdisc player or DVD player.
When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed.
Select Off to disable this function.
Press EXIT to quit menu or select SET THE INPUTS.
NOTES: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above.
2.When using REMOTE mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc or DVD play button.
3.If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours.
61
