First time use
Front/Side Panel Controls
FRONT VIEW
REAR/SIDE VIEW
SIDE POWER button
Firmly bind the cables. | Hook the band | |
| Thread the square | |
| hole with the band. | to the claw. |
Press this button to turn the Plasma Television | NOTE: | The Rear View of the 55” model is slightly | |
ON/OFF. It can also be turned ON/OFF by remote | |||
| different from the 42” models. One of the | ||
control. The “MAIN POWER” button must be at |
| ||
| differences are the handles that are only | ||
| |||
| present on the 42” models. | ||
|
|
MENU/SELECT button
This button allows you to enter the MENU, making it possible to set TV features to your preference without using the remote. This button also serves as the SELECT button when in MENU mode.
SIDE HDMI INPUT (5)
Use the side HDMI input for extrenal devices such as
INPUT/EXIT button
Press this button to access the INPUT menu. Press again to exit the MENU mode.
CHANNEL selector
Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down ( ) and up ( ) buttons when in MENU mode.
POWER button
Television MAIN POWER button
This power button is for the complete system, and must be turned ON/OFF manually. It is recommended to leave the “MAIN POWER” to ON condition (lights red) for
The Main Power button is located on the broadside bottom, under the label “MAIN POWER”.
NOTE: When the “MAIN POWER” button is set to OFF or the TV is unplugged, the clock will stop and may eventually reset itself.
VOLUME level
Press these buttons to adjust the sound level. The volume level will be displayed on the TV screen. These buttons also serve as the cursor left ( ) and right ( ) buttons when in MENU mode.
10
