Hitachi 42HDT79, 55HDT79, 42HDX99, 55HDX99 How to Use the ENT Button, Input Access

How to Use the ENT Button

INPUT ACCESS
This optional feature allows the user of the remote
control to setup it’s ENTER (ENT) button to access the	,	,	,	,
specified input of the TV. Setup for this feature is
applicable to the remote control’s normal mode only
and only applies to the DVD, CBL, STB, PVR and AMP
modes.

1. Select the desired device mode (DVD, CBL, STB, PVR, or AMP) by using your SOURCE ACCESS buttons ( or ) to position the LED indicator to the corresponding selection.

+

2.Hold down the ENTER (ENT) button on the remote and enter the four digit preset code that matches your device as shown on pages 42-43.

3.Then enter the assigned input number (1-5) that the device is related to.

4.Release ENTER (ENT) button.

5.If done correctly, the device LED indicator will flash 3 times to confirm proper setup.

6.The remote will now control the desired device.

7.Pressing the ENTER (ENT) button will now access the video input (1-5) of the desired device.

-

/

The Remote Control

SETUP EXAMPLE (Hitachi DVD with precode 0573 connected to INPUT 1 of the TV)

Select DVD mode by using your SOURCE ACCESS	NOTE: 1. This feature is optional
buttons ( or ) to position the LED indicator to	2. Assigned input numbers can be used more
DVD.	than once if applicable.
Hold down the ENTER (ENT) button and press the
numbers 0, 5, 7 and 3.
Then press the number 1 for the assigned input
number of the DVD player.
Release ENTER (ENT) button.
If done correctly, the device LED indicator will flash
3 times to confirm proper setup.
The remote will now control the DVD player.
Press the ENTER (ENT) button to instantly access
the video input of your DVD on Input 1.

41